Pre-Sale Products Are Custom Orders From Manufacturer. No Stock On Hand

The New Pre-Sale Catalog Has Been Launched.

What is Pre-Sale?

Click to View More

Thinkcar Thinktool Pro OBD2 Professional Full System Diagnostic tool


1214 in stock

SKU: 114354984019297 Categories: , , Tag:

2021 TINKCAR THINKTOOL Pro 8″ Full System Diagnostic tool with 28+Special Functions, BT/wifi connection +Free Software +ECU Coding + Actuation Test + Make AF Adjustment + 32GB Storage+Multi Languages Supported .3 Years Free Update + 5 Year Warranty Lifetime Free Tech Support.


What is the THINKTOOL Pro?

THINKTOOL Pro is a new generation of modular intelligent diagnostic equipment based on the Android 10system developed by THINKCAR. Featured with our unique modular design, THINKTOOL Pro can be widely applied to various scenarios.



1. The main unit and diagnostic connector support BT and wired communication. Wired communication is superior to BT connection in terms of transmission rate and anti-interference.

Also, a wired connection is recommended for online programming functions.

2. Supports powerful intelligent VIN recognition technology, which is convenient, fast, and efficient.

3. Quick Check Printing: Automatic identification of Vehicle Information, Auto Check, and Report Printing

4. Modular expansion: Support 8 optional modules: printer, work light, video scope, battery tester, scope box, thermal imager, moudledock, wireless TPMS tool (note: you can buy those models on ThinkStore)

5. It can detect faults in the electronic control systems of most high-, medium-, and low-end vehicles in Asia, Europe, the United States, and China. Powerful diagnostic functions include reading fault codes, clearing fault codes, reading data streams, action tests, and special functions.

6. Maintenance function: matching, coding, programming of most vehicles’ programable modules, and

most commonly used maintenance and reset functions: Oil Reset, Elec. Throttle Adaption, IMMO Service, Injector Coding, Break-pad Reset, Steering Angle Reset, ABS Bleeding, AFS Reset, Battery Matching, A/T Learning, DPF Regeneration, EGR Adaption, TPMS Reset, Sunroof Initialization, Suspension Matching, Gear Learning, Airbag Reset, ODO Meter Reset, AdBlue Reset, A/F Reset, Coolant Bleeding, Language Change, NOx Sensor Reset, Seat Calibration, Stop/Start Reset, Transport

Mode, Tyre Reset, Windows Calibration.


7. TPMS function: with wireless TPMS tool (optional), TPMS activation, programming and learning functions can be supported.

8. Online one click to update diagnosis software, client, and firmware.

9. Feedback: Any abnormal software or function during the diagnosis, just feedback to us, our professional technician will track and deal with it in time.


And More features waiting for you to discover……

Quick test: It enables you to quickly access all the electronic control units of the vehicle and generate a detailed report about vehicle health. support system scan and system select

System Scan: automatically scan all systems of the vehicle

System Selection: manually choose the automotive electronic control system.

Quick Check and Printing

It adopts a smart detection mode. After the vehicle is connected, the system will automatically recognize

the vehicle information, automatically check the vehicle, and automatically generates a report. Automatic

printing can be set so that no human intervention is needed throughout the process.


Want a Full-System scanner?

To diagnose cars comprehensively, the Thinktool Pro scanner can read DTCs and data streams, perform the active test, Coding for ALL systems.

For instance: Engines/Auto Transmission/Airbags/Immobilizer/Key Coding/ABS/Cruise Control/Instruments/ Self Leveling Suspension systems/Seats/Doors/Gateway/Steering Angle/Air Suspension/Body Systems/Electronic Power Steering & Motor Assisted/Power Steering/Tyre Pressure/Rain Sensors/4WD System/Stabilizer/Intelligent Parking Assist/Door Motors/Audio Systems/Air Conditioning/Tiptronic/Anti Theft/Soft Top/Headlamp Leveling/Central Locking/Automatic Clutch/ DPF Reset/Electric Windows/Plip Programming/Heated Rear Window/Xenon Headlights/Wash Wipe/Fuel Burning Heater/Transfer Box/Seat Memory/Oil Life Service Reset/Sliding Doors/Electronic Throttle/Navigation System/Rollover Sensor/Cruise Control/ Multi Functios.


Actuation Test: This function is used to test whether the execution components in the electronic control system can work



The Coding function is used to re-flash the vehicle control modules, it allows you to reprogram adaptive data for certain components after making repairs or replacements.


Graphical display

Combine: Displayed in graph merge status for data comparison.

Value: Displayed the parameters in values and shown in list format.

Customize: Customize the data stream option to be viewed. Tap the button, and a pull-down list of the data stream items appears on the screen. Select the desired items (max12 items), and then the screen will display the waveforms corresponding to these items immediately. If need to remove any items, just deselect them.


Diagnostic Feedback

If you encounter an unresolved problem or diagnostic software bug during diagnosis, you can revert

the most recent 20 test records to Thinkcar Team. When we receive your feedback, we will analyze and troubleshoot it in a timely manner, to improve the quality of our products and user experience.


Quick print diagnostic reports

Thermal printer, work with the main unit, also can work with the module dock. Quick print diagnostic reports anytime and anywhere.


THINKTOOL Pro Support 28+ Kinds of Special Reset Service:


1. Oil Reset

The lightening of the car maintenance light indicates that the vehicle needs maintenance. Reset the mileage or driving time to zero after the maintenance, so the maintenance light will go out and the system will start a new maintenance cycle.


2. Elec.Throttle Adaption

Elec. Throttle Adaption is to utilize the car decoder to initialize the throttle actuator so that the learning value of the ECU returns to the initial state.


3. Steering Angle Reset

To reset the steering angle, first find the relative zero point position for the car to drive in a straight line. Taking this position as a reference, the ECU can calculate the accurate angle for left and right steering.


4. Battery Matching

This function enables you to perform a resetting operation on the monitoring unit of the vehicle battery, in which the original low battery fault information will be cleared and battery matching will be done.


5. ABS Bleeding

When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity.


6. Break-pad Reset

lf the brake pad wears the brake pad sense line, the brake pad sense line sends a signal sense line to the on-board computer to replace the brake pad. After replacing the brake pad, you must reset the brake pad. Otherwise, the car alarms.


7. DPF Regeneration

PDF regeneration is used to clear PM(Particulate Matter) from the PDF filter through continuous combustion oxidation mode (such as high-temperature heating combustion, fuel additive or catalyst to reduce PM ignition combustion) to stabilize the filter performance.


8. Gear Learning

After the engine ECU, crankshaft position sensor, or crankshaft flywheel is replaced, or the DTC ‘gear not learned’ is present, gear learning must be performed.


9. IMMO Service

To prevent the car from being used by unauthorized keys, the anti-theft key matching function must be performed so that the immobilizer control system on the car identifies and authorizes remote control keys to normally use the car.


10. Injector Coding

Write injector actual code or rewrite code in the ECU to the injector code of the corresponding cylinder so as to more accurately control or correct cylinder injection quantity.


11.TPMS Reset

Note: Cooperate with wireless tire pressure diagnosis tool to realize TPMS activation, programming, and learning functions


12. Suspension Matching

This function can adjust the height of the body. When replacing the body height sensor in the air suspension system, or control module or when the vehicle level is incorrect, you need to perform this function to adjust the body height sensor for level calibration.


13. AFS Reset

This feature is used to initialize the adaptive headlamp system.


14.A/T Learning

This function can complete the gearbox self-learning to improve gear shifting quality.


15. Sunroof Initialization

This function can set the sunroof lock off, closed it when it rains, slide/tilt the sunroof memory function, temperature threshold outside the car, etc.


16. EGR Adaption

This function is used to learn the EGR valve after it is cleaned or replaced.


17. ODO Reset

ODO reset is to copy, write, or rewrite the value of kilometers in the chip of the odometer by using a car diagnostic computer and data cable, so that the odometer shows the actual


18. Airbag Reset

This function resets the airbag data to clear the airbag collision fault indicator.


19. Transport Mode

ln order to reduce power consumption, the following functions may be disabled, including limiting the vehicle speed, not waking up the door opening network, disabling the remote control key, etc. At this time, the transport mode needs to be deactivated to restore the vehicle to normal.


20. A/F Reset

This function is applied to set or learn Air/Fuel ratio parameters.


21. Stop/Start Reset

This function is used to open or close the automatic start-stop function via setting the hidden function in ECU(provided that the vehicle has a hidden function and is supported by hardware).


22. NOx Sensor Reset

NOx sensor is a sensor used to detect the content of nitrogen oxides (NOx) in engine exhaust. lf the NOx fault is re-initialized and the NOx catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine Ecu.


23. AdBlue Reset (Diesel Engine Exhaust Gas Filter)

After the diesel exhaust treatment fluid (car urea) is replaced or filled up, the urea reset operation is required.


24. Seat Calibration

This function is applied to match the seats with memory functions that are replaced and repaired.


25. Coolant Bleeding

Use this function to activate the electronic water pump before venting the cooling system.


26. Tyre Reset

This function is used to set the size parameters of the modified or replaced tire.


27. Windows Calibration

This feature is designed to perform door window matching to recover ECU initial memory and recover the automatic ascending and descending function of the power window.


28. Language Change

This function is used to change the system language of the vehicle’s central control panel.



[Multilingual Support]

English, France, Germany, Spanish, Italy, Portugal, Japan, Russia, Chinese



















Additional information



Wholesale Inquiry

    Be the first to review “Thinkcar Thinktool Pro OBD2 Professional Full System Diagnostic tool”

    Your email address will not be published.


    There are no reviews yet.

    Pre Sales
    Our customer support team is here to answer your questions. Ask us anything!

    Main Menu

    Thinkcar Thinktool Pro OBD2 Professional Full System Diagnostic tool